Select Language
- All
- Title
- All
- Title
Select Language
Payment Type: L/C,T/T,Paypal
Transportation: Ocean
Brand: NIC
Place Of Origin: China
| Selling Units | : | Piece/Pieces |
|---|---|---|
| Package Type | : | Inside are PP bags, cartons and cartons |
| Picture Example | : |
|
NIC 512 InGaAs Linear Array Detector
Notes：
1) During the installation process of TEC, it is necessary to pay attention to the new resistance introduced by the external electrical structure. If the new resistance exceeds 10% of the TEC resistance, it is necessary to calibrate I -V curve again.
2) It is recommended to connect the TEC with small connection resistance. If welding is required, short-circuit grounding protection is required. The welding temperature should be controlled within 250℃ and the welding time should be controlled within 10s.
3) The relation between the temperature and the resistance in each node interval of the temperature monitoring module can be approximately equally compared to a first-order linear function, and the resistance value corresponding to the preset temperature can be estimated according to the needs.
4) Before tuning on TEC, it must be confirmed that the temperature monitoring module is working normally. The heat dissipation surface is in sufficient contact with the heat sink device. The size of heat dissipation surface needs to be bigger than the required one, and the heat sink device is working normally. It’s forbidden to turn on TEC without installing a heat sink device or the heat sink device is not working.
5) When the TEC is on for the first time, the current or voltage should be gradually loaded from 0A or 0V, and monitoring the temperature change until the preset temperature is reached.
6) Since the performance of the detector is affected by the temperature, be sure to turn on TEC until the temperature is stable before turning on the detector, and it is not recommended that the detector work in an environment of temperature change.
7) When the detector is not working, please turn off TEC to extend the service life of TEC.
8) The cooling and heating performance of the detector is related to the ambient temperature, power supply performance, and heat dissipation state, and it is recommended to carry out a reasonable combination of the heat dissipation system according to its operation environment and the performance requirements.
Packaging: Inside are PP bags, cartons and cartons
Transportation: Ocean
Place of Origin: CHINA
Payment Type: L/C,T/T,Paypal
Incoterm: FOB,CFR,CIF
The short-wave infrared imager generates high-resolution images by receiving infrared reflection signals from the target, and it works very well when the sun or starlight serves as the reflected light source for the target. Compared with visible light detection, short-wave infrared also has good detection ability under the conditions of smoke, haze and dust. The short-wave infrared InGaAs detector operates at room temperature. Its significant advantages of high performance, high reliability, low power consumption, and low cost, makes it to be the ideal choice for the short-wave infrared system.
Zhongke Dexin has the design and development ability for short-wave infrared InGaAs materials and devices. There are typical products in different specifications, with the international high-end equipment manufacturing standard. Our products can be widely used in food color selection, industrial testing, medical imaging, security monitoring, forest fire prevention, cultural relic identification, space remote sensing and other fields. We are committed to develop the infrared optical and electric sensing technology, for serving the national economy and inheriting aerospace science and technology. With the conception of "sensing the world with infrared", we develop core technology of infrared photoelectric materials and devices, promoting the transformation and industrialization of related technology achievements.
We look forward to cooperate with you.
Hot Products
SEND INQUIRY
Contact Now